Taylor Rental

Taylor Rental Center of Webster, NY

Product Catalog

  • Manufacturer: Komatsu
  • Model Number: PC27MR

Performance and Versatility, Standard auxiliary hydraulics, Standard thumb mounting bracket, Three track options: rubber, steel, roadliner, Automatic two-speed travel, ISO/SAE pattern change valve

Please contact us for current pricing and availability.

  • Manufacturer: DeWalt
  • Model Number: DWD520

Dewalt Drill. 1/2 In. Variable Speed Reversing Pistol-Grip Drill Dwd520

The DEWALT 1/2 in. VSR Pistol-Grip Hammer Drill Kit features a powerful 10 Amp motor that's designed with high overload protection and metal gear housing for durability and reliability at the jobsite. The dual hammer drill and drill modes offer versatility for drilling in steel, masonry and wood, while the 2 speed ranges provide optimal speeds for high-torque and high-speed drilling applications.

Please contact us for current pricing and availability.

  • Manufacturer: Bil-Jax

11' to 15' Reach - Tilt Drywall Panel-Lift

150 LB, Capacity Panel Lift
Lifts To 11'0" High
Holds Sheets To 4' x 16"
Breaks Down For Portability
Extension to 15' available

Please contact us for current pricing and availability.

Propane Torch for Roofing, Asphalt or Tar

Please contact us for current pricing and availability.

  • Manufacturer: Bosch
  • Model Number: 11316EVS
  • 3/4" Hex Tool Holder
  • Constant Response Circuitry
  • Variable Speed Dial
  • Service Minder Light
  • Padded Rear Handle
  • 160 degree Auxiliary Handle

Please contact us for current pricing and availability.

Easliy remove roofing shingles

Please contact us for current pricing and availability.

  • Manufacturer: Porter-Cable

This machine does all the work – and sucks up the dust at the same time! What more could you ask for? The only thing that it doesn’t do are the tight little intricate areas (like inside corners) – which are done by hand with a sanding sponge.

Please contact us for current pricing and availability.

Wheelbarrow 5 Cubic Ft. capacity

Please contact us for current pricing and availability.

  • Manufacturer: Ground Hog
  • Model Number: D5

Easy two man design, heavy duty gear box, “dead man” clutch, various sized bits


Drilling Depth : Up to 3 ft (Extension Available)
Powered by : Gasoline
Operating Weight : 108 lb w/no bit
Dimensions : 60 x 32 x 40 in

Please contact us for current pricing and availability.

  • Manufacturer: Ground Hog
  • Model Number: HD99

Hydraulic One Man auger with reverse. Towable with a 2" ball. This unit includes one bit 4" - 12" bit x 3' deep. A 12" extension is also available.

Please contact us for current pricing and availability.

  • Model Number: 2200

Portable Generator: Lifan. 2200-Watt Suitcase Es2200sc

All Lifan generator products are made with Lifan Horizontal Shaft OHV engines which feature Industrial duty upgrades like cast iron sleeves, automotive grade rods, pistons, rings, crankshafts, valve and valve springs. The Lifan OHV design provides better fuel efficiency, quieter operation, and longer life. This Generator is perfect for people who need both power and dependability and quiet at the party, shop, jobsite or garage.

Please contact us for current pricing and availability.

  • Manufacturer: Wacker Neuson
  • Model Number: WP1550

Premium plates feature a durable baseplate for various applications. These premium vibratory plates feature a tough, wear resistant, ductile iron baseplate offering high strength and shock resistance. This computer designed baseplate has a tapered bottom and edges for high speed and excellent maneuverability. Designed for the compaction of granular and mixed materials with some cohesive content in confined areas such as pavered walkways and patios.

Please contact us for current pricing and availability.

  • Model Number: NGK 4300H

Brand: Honda GX

Starting System: Recoil Start

HP/CC: 8 HP Consumer Engine Warranty: 2 Years

Commercial Engine Warranty: 2 Years

Engine RPM:

3600 RPM

Low Oil Alert: Yes Cast Iron Sleeve: No

Product Specs:

Voltage 120/240 Single-Phase Frequency: 60 Hertz

Alternator: Brushless Auto Voltage Regulation: Not Necessary

Fuel Type Gasoline

Rated Amps: 16 Amps @ 240 Volts (Single Phase) Portability Kit: Sold Separately

Tank Size: 4.5 Gallons Run Time (50% Load): 8.5 Hours

Fuel Tank Material:

Metal Fuel Gauge: No

Decibel Rating @ 7m: 72 db(A)

Idle Control: Yes

Hour Meter: No

Please contact us for current pricing and availability.

  • Model Number: NGK-7000H

7000 watt, 120/240v, max amps- 58.3, rated output- 6000w, rated amps- 50, Honda engine with 13HP, auto idle, 4.5 gal tank, 5.2hrs run time, 26"Lx21.3"Wx20.5"H, 191 lbs. Generator includes H.D.roll cage, low oil sensor, electro-magnetic circut breakers, 120v GFCI"s to prevent tool shock, brushless, 100% copperH.D. COA windings.

Please contact us for current pricing and availability.

Use this standard bucket for moving rock, dirt, sand or other materials off and around the job site. The hardened steel cutting edge offers improved cutting and digging capability for better performance to handle tough digging conditions and affords superior wear. Capacity = 4 cubic feet (1 cu. m.).

Please contact us for current pricing and availability.

takes 9/16" carpet staples

Please contact us for current pricing and availability.

Powerful 15 AMP motor delivers 3,200 RPM
Dual steel rails with two linear ball bearings ensures stable, accurate and vibration-free cutting
Precision bevel cutting up to 45° both left and right plus positive stop at 33.9° 9 positive stops at 0°,15°,22.5°,31.6°,45° left or right for the most common miter cuts
Single cast base with built-in wrench storage for easy access
Electronic speed control maintains constant speed under load for smooth cutting - soft start feature for smooth startups
Large turn base and adjustable pivot fence for supporting larger stock
Smooth easy slide system allows cross cuts up to 12-1/8" wide
Large, easy to read scale for miter cuts up to 52° right and 47° left

 

Please contact us for current pricing and availability.

SCREW JACK - 20 Ton, 12 Ton and 10 Ton

Contractor quality mechanical jack for all-purpose lifts and supports. Holds heavy loads indefinitely - will not creep. Heavy-duty bell shaped cast base. Less effort required to lift capacity load with new design. Corrugated steel swivel head turns easily under load. Easy to carry and position. Turning bar is included.

Please contact us for current pricing and availability.

  • Heavy duty steel tubing
  • Corrosion resistant paint inside and out
  • Zinc coated secure bolt and nut connectors
  • Heavy duty solid steel nut
  • Heavy plates suited for wood and steel

Please contact us for current pricing and availability.

Boring Jig Kit complete with basic fixture for Standard 2-3/8" and 2-3/4" backset positioning. Includes heavy-duty carrying case and easy to follow illustrated instruction sheet. Built for the professional yet easy to use.

Kit Includes:

  • 1" spade boring bit
  • 2-1/8" spur bit
  • 3/8" quick release adapter
  • 1-3/4" x 2-1/4" strike mortiser
  • Latch mortiser steel strike marker
  • Heavy duty molded carrying case

 

Please contact us for current pricing and availability.

  • Manufacturer: David White
  • Model Number: ALT6-900

Transit, comes with tripod and measure stick.

Please contact us for current pricing and availability.

Stapler, Hammer

Please contact us for current pricing and availability.

Cutter, Mineral Shingle

 

Please contact us for current pricing and availability.

  • Manufacturer: Toro
  • Model Number: 22473

The High Torque Trencher guarantees performance in very tough digging conditions

Please contact us for current pricing and availability.

  • Manufacturer: Toro
  • Model Number: 22805

The High Torque Auger Power Head is designed specifically to power up to 30" auger bits in tough soil conditions, making it an excellent tool for digging holes for trees, footings, irrigation valve boxes, poles, fence posts and more

Please contact us for current pricing and availability.